What FBR published from 3 to 6 November 2026
The Federal Board of Revenue issued seven final notifications and one operative Sales Tax General Order during this review window. It also published one Customs proposal for public comment.
The dates below are the dates printed on the underlying official documents. S.R.O.s 2009, 2060, 2061, 2062, 2063, 2085 and 2086 are final notifications. STGO 33 is an operative order. S.R.O. 2088 expressly says "draft amendments" and invites objections, so it is not presented as a current Customs rule.
Sales tax is accounted for when an advance is received
S.R.O. 2063(I)/2026, dated 5 November, replaces rule 160 of the Sales Tax Rules, 2006. A registered person covered by section 23 who receives an advance against a supply must issue an advance receipt invoice for each payment and account for the output tax in the return for the tax period in which that payment is received. The advance receipt invoice is treated as a tax invoice for the purposes of input-tax sections 7 and 8.
Multiple advances for the same supply must be electronically linked. When the supply is made, the final sales-tax invoice must refer to the advance invoices. Value and tax already accounted for are not charged again; tax is calculated only on the remaining value. The rate on each advance is the rate applicable when that advance is received, while the rate on the unpaid balance is the rate applicable when the supply occurs. Increases, reductions, refunds or cancellations are adjusted through section 9 and rules 19 to 22.
This is a final accounting rule, not a draft. Businesses taking deposits or instalments should check whether their invoicing, return period and electronic cross-references follow the new sequence.
Final faceless assessment procedures for Income Tax, Sales Tax and FED
Two final notifications dated 5 November set out parallel faceless-assessment procedures.
S.R.O. 2062(I)/2026 finalizes the Income Tax proposal previously published as draft S.R.O. 1905. It expands Chapter XX of the Income Tax Rules, 2002 and inserts rule 240A. A Faceless Assessment Unit may conduct assessment proceedings based on audit or definite information, rectify an apparent mistake in an order it passed, and carry out related proceedings such as notices, evidence gathering, penalties or default surcharge. Cases are allocated automatically; taxpayers submit replies and evidence through their designated IRIS account. Unit officers may seek technical, valuation, forensic or sector expertise, request physical verification and conduct an e-hearing.
S.R.O. 2085(I)/2026 makes corresponding changes in Chapter VI-AC of the Sales Tax Rules, 2006 for Sales Tax and Federal Excise proceedings. It authorizes the Faceless Assessment Unit to conduct proceedings and pass assessment orders under the relevant law, rectify its orders and handle related notices, evidence, penalties and default surcharge. It also preserves automated allocation, IRIS submissions, technical assistance, physical verification and e-hearing.
These notifications change assessment machinery and procedure. They do not by themselves announce a new tax rate or a general filing extension.
Trace-and-track now covers appliances and storage batteries
S.R.O. 2009(I)/2026, dated 3 November, makes final amendments to Chapter XIV-B of the Sales Tax Rules, 2006. It adds specified finished household electrical goods—air conditioners, refrigerators, deep freezers, washing machines and televisions—and storage batteries to the trace-and-track framework. Excluded battery items include parts such as plates, separators and grids, and batteries exempt under the Sixth Schedule.
The notification also allows a state-owned enterprise to qualify for a licence subject to the stated mandate, technical-capability and financial-position tests. Licences are limited to the specified goods named in each licence. It expands licensed services to the issue, supply, affixation, activation and verification of tax stamps and related application equipment, states that system data belongs to FBR on behalf of the Government, and bars import clearance of covered goods without affixed and activated tax stamps.
The notification permits the Board to specify automatic, semi-automatic or manual application equipment according to production-line volume. It does not itself give every manufacturer the same equipment configuration.
Narrow steel changes: minimum value and one corporatization entry
S.R.O. 2086(I)/2026, dated 5 November, raises a narrow minimum-value benchmark introduced in October. For re-meltable iron and steel scrap supplied by a recycled-copper manufacturer-cum-exporter authorized under the Export Facilitation Scheme directly to a registered steel melter, the minimum value inclusive of Sales Tax is now 60% of the steel-bar value at serial 1 of S.R.O. 2402(I)/2025, up from 55%. It changes the valuation benchmark for this defined supply, not the general Sales Tax rate.
Sales Tax General Order No. 33 of 2026, dated 6 November, adds one newly incorporated steel entity as serial 24 under the existing voluntary-corporatization procedure. It is a narrow entity-list update, not a sector-wide change in registration or electricity-based taxation.
Abbottabad and rural Islamabad property valuations
Two final Income Tax notifications dated 5 November alter section 68 property values.
S.R.O. 2060(I)/2026 supersedes S.R.O. 1679(I)/2024 and publishes a new Abbottabad table for residential and commercial open plots, together with age-based rates for constructed property. The schedule is location-specific, covering named bazaars, roads and localities; it should not be reduced to a single district-wide rate.
S.R.O. 2061(I)/2026 amends Islamabad notification S.R.O. 644(I)/2026. Rural areas of the Islamabad Capital Territory are now to be valued according to the latest valuation issued from time to time by the Additional Deputy Commissioner (Revenue) or District Collector, Islamabad. This is a reference to the latest local valuation rather than a frozen number in the FBR notification.
Customs-agent licence proposal remains a draft
The document catalogued as S.R.O. 2088(I)/2026 is dated 3 November, but the signed PDF expressly labels the text "DRAFT AMENDMENTS" and allows ten days after Gazette publication for objections or suggestions.
The proposal would replace "tax" with "fiscal" in two Customs-agent licensing criteria and allow the relevant Collector to constitute a Licence Renewal Committee headed by the licensing authority with two Assistant or Deputy Collectors. The committee would also examine the licensee's past profile and performance.
As of the 9 November review, this is a proposal. Customs agents should not treat the proposed committee or wording changes as final merely because the FBR catalogue uses an amendment-style title.
Other official channels checked
FBR's official registers showed no newer material Income Tax, Sales Tax, Federal Excise or Customs circular in this review window. There was no new Customs or Federal Excise general order and no press release after 29 October. STGO 33 was the only new Sales Tax General Order after the previous weekly post.
What affected businesses should check
- Suppliers receiving deposits or instalments should map each receipt, output-tax period, rate and final invoice to the new advance-invoice chain.
- Taxpayers in faceless proceedings should use the designated IRIS account for replies and evidence and retain records needed for technical or physical verification.
- Appliance and battery manufacturers, importers and licensees should confirm whether each product is within rule 150ZF and what equipment, stamp and licence conditions FBR specifies for it.
- The defined scrap supply should use the new 60% benchmark; other steel products remain governed by their own entries.
- Property parties should use the exact Abbottabad locality or the latest rural Islamabad District Collector valuation rather than a general headline rate.
- Customs agents should monitor for a final instrument before acting on S.R.O. 2088's proposals.
Official FBR sources
- S.R.O. 2009(I)/2026 dated 3 November 2026 - final trace-and-track amendments
- S.R.O. 2060(I)/2026 dated 5 November 2026 - Abbottabad property valuation
- S.R.O. 2061(I)/2026 dated 5 November 2026 - rural Islamabad property valuation
- S.R.O. 2062(I)/2026 dated 5 November 2026 - final Income Tax faceless-assessment rules
- S.R.O. 2063(I)/2026 dated 5 November 2026 - advance-payment Sales Tax accounting
- S.R.O. 2085(I)/2026 dated 5 November 2026 - final Sales Tax and FED faceless-assessment rules
- S.R.O. 2086(I)/2026 dated 5 November 2026 - defined steel-scrap minimum value
- S.R.O. 1829(I)/2026 dated 15 October 2026 - earlier insertion of the defined steel-scrap entry
- S.R.O. 2402(I)/2025 dated 10 December 2025 - underlying steel minimum-value table
- Draft S.R.O. 2088(I)/2026 dated 3 November 2026 - proposed Customs-agent licensing changes
- Sales Tax General Order No. 33 of 2026 dated 6 November 2026 - voluntary steel corporatization list
The bottom line
The most widely relevant change is the new Sales Tax timing and invoice trail for advance payments. Faceless assessment now has final procedures across Income Tax and the Sales Tax/FED framework, while trace-and-track reaches additional manufactured goods. The steel and property measures are narrower and must be applied to their exact supplies or locations. The Customs-agent proposal remains a draft.
Disclaimer: This article summarizes official FBR documents reviewed on 9 November 2026. It is general information, not individualized Income Tax, Sales Tax, Federal Excise, Customs, property, manufacturing or legal advice. Check the current law, the exact instrument, your facts and any later amendment before acting.
